OEM LEDs

From MachCustomizeWiki

This list gives the codes to be used in calls of SetOEMLED and GetOEMLED to access all LEDs.

If you are using a version of Mach3 prior to 1.90 then to access data in this list that are in the range 800 upwards you will need to refer to the deprecated calls (e.g. SetLED) and corresponding codes.

Function	FCode
G92 LED	10
Spindle ON LED (CW or CCW)	11
Mist LED	12
Flood LED	13
Jog mode Cont LED	14
Jog mode Incr LED	15
Mach coords warn LED	16
Feed override LED	17
Estimating LED	18
Emergency LED	19
A radius corr. LED	20
B radius corr. LED	21
C radius corr. LED	22
Software limits LED	23
Torch En LED	24
True spindle Acc LED	25
True spindle Dec LED	26
Tool Path LED	27
Tool Offset on LED	28
Part Offset on LED (always in 6.11)	29
Throttle is Slow Jog LED	30
Throttle is Feedrate LED	31
reserved	32
Auto Lim override LED	33
Override Limits/home switches LED	34
SS on Act4 LED	35
THC Arc Good LED	36
Torch Up active LED	37
Torch Down active LED	38
Feed per Rev LED	39
Feed per Min LED	40
X Scale LED	41
Y Scale LED	42
Z Scale LED	43
A Scale LED	44
B Scale LED	45
C Scale LED	46
reserved	47
Abs Coordinate Mode LED	48
Incremental Coordinate Mode LED	49
Threading Sync Mode LED (Turn)	50
Laser Probe enabled LED	51
Z-Inhibit ON LED	52
Ignore Tool Change ON LED	53
CV Mode ON LED	54
M30 Repeats Enabled LED	55
CV mode OFF LED	56
MPG Jog On LED	57
Cont. Jog is at full speed LED	58
MPG 1 Jogs X axis LED	59
MPG 1 Jogs Y axis LED	60
MPG 1 Jogs Z axis LED	61
MPG 1 Jogs A axis LED	62
MPG 1 Jogs B axis LED	63
MPG 1 Jogs C axis LED	64
Optional Stop On LED	65
Block Delete On LED	66
Offline indicator LED	67
Threading feed related to true Spindle speed LED	68
Index signal awaited LED (Turn)	69
Anti-dive enabled LED	70
Spindle speed stable LED	71
IJ Mode is Absolute LED	72
IJ Mode is Incremental LED	73
G-code teaching file is open LED	74
Offset in effect on at least one axis LED	75
reserved	76
Output 4 Active LED	77
Output 5 Active LED	78
Output 6 Active LED	79
Pause Active LED	80
Tangential control Active LED	81
Single Step mode Active LED	82
Jogging enabled LED	83
CV feed enabled LED	84
Enhanced Pulsing NOT in use LED	85
Axis inhibited X LED	86
Axis inhibited Y LED	87
Axis inhibited Z LED	88
Axis inhibited A LED	89
Axis inhibited B LED	90
Axis inhibited C LED	91
Diameter mode active (Turn) LED	92
Timing signal active (Turn) LED	93
Hotkeys enabled LED	94
Units per minute mode LED	95
Units per rev mode LED	96
Running in reverse (duplicated by 112) LED	97
MPG 2 Jogs X axis LED	98
MPG 2 Jogs Y axis LED	99
MPG 2 Jogs Z axis LED	100
MPG 2 Jogs A axis LED	101
MPG 2 Jogs B axis LED	102
MPG 2 Jogs C axis LED	103
MPG 2 in taper mode LED	104
Two MPGs in use LED	105
Shuttle mode in use LED	106
Spindle is in CSS (G96) mode LED	107
X/Y coordinate system is currently rotated LED	108
Rapids being overidden LED	109
Axis formula mappin ON LED	110
Feedhold when part of a block executed - remainder pending LED	111
Running in reverse (duplicate) LED - do not use	112
Alternative feedrate in use (see OEM DRO 122) LED	113
Front tool post selected LED	114
Rear tool post selected LED	115
Spindle is running LED	116
MPG jog Velocity mode selected LED	117
MPG jog Velocity/Step mode selected LED	118
MPG jog single exact step mode selected LED	119
MPG jog multiple steps selected LED	120
X++ jogging switch active LED	121
X-- jogging switch active LED	122
Y++ jogging switch active LED	123
Y-- jogging switch active LED	124
Z++ jogging switch active LED	125
Z-- jogging switch active LED	126
A++ jogging switch active LED	127
A-- jogging switch active LED	128
Mouse in tool path Zooms LED	129
Mouse in tool path Pans LED	130
MPG 3 Jogs X axis LED	130
MPG 3 Jogs Y axis LED	131
MPG 3 Jogs Z axis LED	132
MPG 3 Jogs A axis LED	133
MPG 3 Jogs B axis LED	134
MPG 3 Jogs C axis LED	135
MPG 3 Jogs X axis LED	130
reserved	130 - 161
A macro is running LED	162
Distance to go display in Axis DROs LED	163
Spindle rotating CW LED	164
Spindle rotating CCW LED	165
Conditions are abnormal LED	166
reserved	167
CV Distance tolerance is ON LED	168
Reset LED	800
Inch LED	801
MMs LED	802
Idle LED	803
Start LED	804
Pause LED	805
Tool change LED	806
X ref LED	807
Y ref LED	808
Z ref LED	809
A ref LED	810
B ref LED	811
C ref LED	812
Dwell LED	813
Joystick enable LED	814
Fixture LED	816
Input 1 Active LED	821
Input 2 Active LED	822
Input 3 Active LED	823
Input 4 Active LED	824
Digitise In LED	825
Index LED	826
Limit OV LED	827
X++ Limit LED	828
X-- Limit LED	829
X-- Home LED	830
Y++ Limit LED	831
Y-- Limit LED	832
Y-- Home LED	833
Z++ Limit LED	834
Z-- Limit LED	835
Z-- Home LED	836
A++ Limit LED	837
A-- Limit LED	838
A-- Home LED	839
B++ Limit LED	840
B-- Limit LED	841
B-- Home LED	842
C++ Limit LED	843
C-- Limit LED	844
C-- Home LED	845
Enable 1 LED	846
Enable 2 LED	847
Enable 3 LED	848
Enable 4 LED	849
Enable 5 LED	850
Enable 6 LED	851
Output 1/Extrn1 Active LED	852
Output 2/Extrn2 Active LED	853
Output 3/Extrn3 Active LED	854
Digitise Out LED	855
System movement in effect or movement imminent LED	999